Filters

$
-
$

Exterior Protection & Styling

39 products

Showing 25 - 39 of 39 products

Showing 25 - 39 of 39 products
View
Save $1,166.01
A front view of a red Nissan Navara or Frontier pickup truck (D40 generation) equipped with a black, angular aftermarket steel bull bar/bumper. The heavy-duty bumper features a single black hoop over the grille and houses an integrated horizontal LED light bar in the center section. The image is cropped tightly, showing the front end of the truck against a white background.A complete black, heavy-duty aftermarket front bumper kit for a vehicle, displayed against a white background. The main bumper features a large, integrated black tubular grille guard hoop and two horizontal LED light bars mounted on the left and right outer edges. It also includes an opening for a winch fairlead and multiple horizontal ventilation slots. Below the main bumper are various mounting brackets, bolts, hardware, and a separate black metal skid plate.
Single Loop Bull Bar & Skid Plate Set Suitable For Nissan Navara D40 2006-2011
$1,499.99 AUD $2,666.00 AUD
In stock, 4 units
Save $1,166.01
A complete, glossy black aftermarket steel front bumper kit for an off-road vehicle, laid out against a white background. The main bumper assembly is at the top, featuring a tubular top hoop, cutouts for two fog lights, and a central opening for a winch fairlead. Below it, the various separate components are arranged, including a large winch mounting plate, two side wings/fender extensions, smaller mounting brackets, hardware plates, and two large lower mounting arms, all finished in a matching black sheen.A white Ford Ranger pickup truck (likely 2015-2022 generation) is shown from a low front-quarter angle, heavily modified for off-roading. It is equipped with a black, heavy-duty steel bull bar/bumper that features a central tubular hoop, a horizontal LED light bar mounted below the hoop, and a winch installed in the center with a visible synthetic rope. The bumper also has integrated fog lights and two prominent red recovery shackles. A roof rack with an additional black LED light bar is visible on top.
Single Loop Bull Bar and Skid Plate Set Suitable For Ford Ranger PX2 T7 2015-2018
$1,499.99 AUD $2,666.00 AUD
Sold out
Save $1,166.01
Front 3 Loop Bull Bar & Skid Plate Set Assembly Suitable For Toyota Hilux N80 2015-2018Front 3 Loop Bull Bar & Skid Plate Set Assembly Suitable For Toyota Hilux N80 2015-2018
Front 3 Loop Bull Bar & Skid Plate Set Assembly Suitable For Toyota Hilux N80 2015-2018
$1,499.99 AUD $2,666.00 AUD
In stock, 9 units
Save $300.00
A set of four matte black, wide aftermarket fender flares, arranged vertically and stacked by size, against a white background. Each flare is curved in an arc shape and features visible silver or chrome mounting bolts around the outer edge, giving them a rugged, riveted appearance. These are designed to provide extra tire coverage for a truck or SUV.
Front & Rear Fender Flare Body Molding Trim Panel Assembly Suitable For Toyota Hilux 2021
$300.00 AUD $600.00 AUD
In stock, 4 units
Save $50.00
A close-up shot of the rear wheel arch of a bright blue pickup truck, likely a Ford Ranger. A matte black, riveted-style fender flare is installed over the wheel arch. The fuel filler cap is visible just above the fender flare. The "ULTIMATE 4X4 ACCESSORIES" logo, featuring a red star icon, is displayed above the image.A close-up of the front wheel arch of a red Ford Ranger pickup truck. A matte black, riveted-style fender flare is installed over the arch. The truck is fitted with a black multi-spoke wheel and an all-terrain tire. A 3.2 badge is visible on the fender vent. The image is isolated on a white background.
Front & Rear Fender Flare Body Molding Trim Panel Assembly Suitable For Ford Ranger PX3 2018-2024
$350.00 AUD $400.00 AUD
Only 2 units left
Save $1,100.00
A flat, straight-on product shot of a heavy-duty, matte black steel rear bumper designed for a truck or SUV, presented with its two mounting brackets. The bumper features a rugged, angular design with cutouts for D-ring shackles on the outer edges and a central receiver hitch opening. There are also slotted openings, possibly for lighting or airflow, on the main body of the bumper. The items are isolated on a white background.A heavy-duty, matte black steel off-road rear bumper is displayed with its mounting hardware against a brick wall background. The bumper is rugged and angular, featuring a central square receiver hitch, two prominent cutouts for D-ring shackles (one shackle is partially visible), and multiple slotted openings on the left and right ends, likely for cube lights or venting. Two large, matching black mounting brackets are placed in front of the main bumper piece.
Rear Bumper Steel Bar With Mount Bracket Trim Panel Assembly Suitable For GWM Cannon
$400.00 AUD $1,500.00 AUD
Sold out
Save $500.00
A product shot of a heavy-duty, flat black steel rear bumper kit for a vehicle, isolated on a white background. The main bumper piece features: A central receiver hitch opening. Integrated amber and red tail/indicator lights on the far left and right ends. A flat surface designed to fit against the vehicle body. Arranged above the main bumper are several associated components, including what appears to be a spare tire carrier mount (angled black piece) and two other mounting or reinforcement brackets.A wide, straight-on product shot of a heavy-duty, flat black steel rear bumper kit for a 4x4 or off-road vehicle. The main bumper piece includes: A central receiver hitch with a tow ball mount attached. Integrated amber and red lights on the far left and right ends. Deep recesses on the sides, likely for mounting to the vehicle frame. The additional components are laid out above the bumper against a gray brick wall background. These pieces include a spare tire carrier mount (a triangular, angled piece)
Rear Bumper Steel Bar With Fuel Tank & Tyre Holder Suitable For Toyota Land Cruiser Prado 150 Series
$1,500.00 AUD $2,000.00 AUD
Only 1 unit left
Save $1,100.00
A product shot of a heavy-duty, matte black steel rear bumper kit for a truck or SUV, laid out with all its mounting hardware on a white surface. The main bumper features a rugged, angular design with an integrated receiver hitch and recessed openings containing horizontal LED lights on both the left and right ends. Spread out below the bumper are several black metal mounting components, including two large, angled brackets and various smaller plates and bolts for installation.A close-up rear view of an orange Ford Ranger pickup truck with an aftermarket, heavy-duty, matte black steel rear bumper installed. The bumper features a rugged, angular design, an integrated horizontal LED light on the visible right side, and a D-ring shackle mounted on the bottom right. A tow hitch assembly is visible beneath the bumper on the left, and the tailgate prominently displays the dark lettering "RANGER". The image is cropped tightly around the bumper and tailgate.
Rear Bumper Steel Bar With Mount Bracket Trim Panel Assembly Suitable For Ford Ranger T7
$400.00 AUD $1,500.00 AUD
In stock, 3 units
Save $500.00
A two-part image showing a heavy-duty, black steel aftermarket rear bumper and installation on a Toyota Land Cruiser. The top image displays the new, matte black bumper unit with integrated reflectors/lights and multiple brackets, including pieces for a swing-out carrier, laid out on concrete against a gray brick wall. The bottom image shows the bumper installed on the rear of a dark gray Toyota Land Cruiser SUV, featuring a tow hitch receiver, a dual swing-out carrier system.
Rear Steel Bar With Jerry Can & Tyre Holder Kit Set Suitable For Toyota Landcruiser 76
$1,500.00 AUD $2,000.00 AUD
In stock, 4 units
Save $1,166.01
Close-up of the front right quarter of a dark green or black Toyota Land Cruiser (likely 80-Series) equipped for off-roading, featuring a snorkel, heavy-duty aftermarket bumper, large off-road tires on black wheels, fender flares with exposed rivets, auxiliary lights on the roof rack, and a round auxiliary light mounted on the bumper. The background is a checkered transparency pattern.Close-up of the front of a white vehicle, likely a Toyota Land Cruiser 80-Series, featuring an aggressive black steel off-road bumper with an integrated winch, large tow hooks, and two prominent round LED auxiliary lights. The vehicle also has rectangular LED light bars integrated into the grille area, replacing or supplementing the factory lights. The background is a checkered transparency pattern.
U Loop Bull Bar Suitable For Toyota Landcruiser 80 Series 1990–1997
$1,499.99 AUD $2,666.00 AUD
Sold out
Save $1,166.01
A white pickup truck, likely a Mitsubishi Triton, is shown from the front-quarter angle. It is heavily modified for off-road use, featuring a large black bull bar/front bumper, a prominent black snorkel rising up the passenger side, and mud-terrain tires on black wheels. The vehicle is set against a checkered, transparent background.A close-up, front-quarter view of a gray pickup truck, likely a Mitsubishi Triton, focusing on its off-road modifications. It features a heavy-duty black steel bull bar or bumper replacement with a central hoop, integrated fog lights and turn signals, and a rugged, knobby off-road tire visible on the left. The truck is set against a checkered, transparent background.
3 Loop Bull Bar and Skid Plate Set Suitable For Mitsubishi Triton 2015-2018
$1,499.99 AUD $2,666.00 AUD
Only 1 unit left
Save $1,166.01
A heavy-duty, black steel bull bar or off-road bumper for a truck or SUV, shown with a center horizontal winch opening, integrated fog/driving lights, and turn signals in the outer wings. Below the bumper are two separate black mounting brackets.A heavy-duty, black metal off-road bull bar or bumper replacement is shown, designed for a truck or SUV. It features a triple-hoop design (one horizontal bar connecting two vertical uprights), integrated fog lights and turn signals on both sides, and a winch mounting plate in the center. Two separate black metal mounting brackets are lying on the ground in front of the bumper.
3 Loop Bull Bar and Skid Plate Set Suitable for Nissan Patrol 2005+
$1,499.99 AUD $2,666.00 AUD
Sold out
Save $1,166.01
A close-up, three-quarter front view of a white pickup truck, likely an older model Mitsubishi Triton/L200, fitted with a heavy-duty, black steel bull bar/bumper. The aftermarket bumper features: A single steel hoop extending in front of the grille. An angular, aggressive design with a cluster of integrated lights (fog light and indicator) on the corner, surrounded by decorative bolts. The bumper wraps around the lower section of the white fender flare. The truck's large original headlight assembly anA product image for Ultimate 4x4 Accessories Panel & Paint, displaying a heavy-duty, matte black steel front bull bar/bumper kit for a truck or 4x4. The image is divided into two parts: Top: The fully assembled bumper is shown, featuring a single-tube hoop (bull bar), large integrated headlights/fog lights on the corners, and a central area designed for a license plate or winch mount. Bottom: The component parts are laid out, including the main mounting bracket.
U Loop Bull Bar & Skid Plate Trim Panel Assembly Suitable For Mitsubishi Triton 2015-2018
$1,499.99 AUD $2,666.00 AUD
In stock, 9 units
Save $1,166.01
A disassembled, matte black, aftermarket steel bumper kit for a truck or off-road vehicle is spread out on a white surface. The main bumper piece is at the top, featuring angular styling, cutouts for a winch fairlead, a large central light bar opening, and two smaller square LED lights recessed into the outer corners. Below the main bumper are several supporting pieces, including two angled end caps/side filler pieces, a central mounting bracket/cradle, a long, textured lower piece.A disassembled, heavy-duty, matte black steel front bumper kit for an off-road vehicle is laid out on a white cloth surface. The main angular bumper section is at the top, featuring cutouts for a winch fairlead, a large central light bar opening, and two smaller recessed LED pod lights. The rest of the kit includes two textured, angled bumper end caps/side filler pieces, a central mounting bracket/cradle, a textured lower skid plate/valance piece, and several small mounting brackets and a bag of hardware.
Front Loopless Bull Bar & Skid Plate Trim Panel Assembly Suitable For Toyota Land Cruiser 100 Series
$1,499.99 AUD $2,666.00 AUD
In stock, 9 units
Save $1,166.01
Front 3 Loop Bull Bar & Skid Plate Set Assembly Toyota Land Cruiser 200 Series 2016-2024Front 3 Loop Bull Bar & Skid Plate Set Assembly Toyota Land Cruiser 200 Series 2016-2024
Front 3 Loop Bull Bar & Skid Plate Set Assembly Toyota Land Cruiser 200 Series 2016-2024
$1,499.99 AUD $2,666.00 AUD
In stock, 3 units

Recently viewed