Filters

$
-
$

All Products

211 products

Showing 121 - 144 of 211 products

Showing 121 - 144 of 211 products
View
Save $120.00
A photo of an automotive snorkel kit laid out on a white surface. The main components include two curved, black plastic air intake pipes (one long and one short), a white plastic fluid reservoir or coolant overflow tank, and various metal mounting brackets, clamps, rubber seals, washers, and nuts and bolts. A folded paper template or instruction sheet is visible on the right edge.A low-angle photo of a silver utility vehicle (SUV or pickup truck) fitted with extensive off-road accessories.

Key features visible include:

A heavy-duty silver bull bar/bumper on the front.

Two large round driving lights mounted on the bull bar.

A black snorkel running up the passenger side of the windshield pillar.

A black roof rack system.

The vehicle is sitting in dry grass. The image is cut off sharply at the bottom.
Front Snorkel Plastic Kit Trim Panel Assembly Suitable For Mitsubishi Triton ML MK Series 2006-2011
Sale price$200.00 AUD Regular price$320.00 AUD
In stock, 8 units
Save $120.00
A flat lay image of a complete vehicle snorkel kit, laid out on a light surface. The kit includes a long, curved, black plastic snorkel intake pipe (the main body), a smaller black plastic inlet head/cowl, a flexible rubber/silicone hose connector, three large metal hose clamps, a small black mounting bracket, an L-shaped metal bracket, several small screws, bolts, nuts, and washers. Below the parts is a large paper template, folded into sections, showing the outline for where to drill/cut into the vehicleA three-quarter view of a silver Toyota Land Cruiser (likely 200 Series) SUV, standing against a white background. A black aftermarket air intake snorkel is prominently installed, running up the front passenger side pillar and along the fender, positioned to draw air from a higher point above the vehicle's hood. The SUV is clean and appears ready for off-road use.
Front Snorkel Plastic Kit Trim Panel Assembly Suitable For Toyota Land Cruiser LC200 Series 2008-2024
Sale price$200.00 AUD Regular price$320.00 AUD
Only 1 unit left
Save $120.00
A close-up side view of the front fender and bonnet of a tan/beige older model Toyota Land Cruiser (likely an 80 series). The vehicle is fitted with a large, curved black plastic snorkel running along the driver's side fender and A-pillar. The fender is also equipped with a wide, black plastic fender flare that has visible bolt heads for a rugged off-road look. A thick, black off-road bumper is visible on the far right.A close-up side view of the front fender and bonnet of a tan/beige older model Toyota Land Cruiser (likely an 80 series). The truck is modified with a large, curved black plastic snorkel installed across the driver's side fender and a wide, black plastic fender flare with exposed silver bolt heads over the wheel arch. The tire is a Cooper brand all-terrain or mud-terrain model on a silver alloy rim.
Front Snorkel Plastic Kit Trim Panel Assembly Suitable For Toyota Landcruiser 80 series
Sale price$200.00 AUD Regular price$320.00 AUD
In stock, 4 units
Save $120.00
A complete black automotive snorkel kit is laid out against a white background. The kit includes the long, molded plastic snorkel body (top center), a black plastic intermediate connecting hose (center left), and the black plastic snorkel head/air ram with a grate (bottom right). The installation hardware is grouped near the bottom right and consists of metal brackets, bolts, screws, washers, and two large hose clamps. A white paper installation template or instruction sheet with outlines and marked X's is A close-up view of the front passenger side of a grey pickup truck, likely a Mazda BT-50 or Ford Ranger, demonstrating an installed black plastic snorkel. The snorkel runs along the fender and up the A-pillar, with the square air ram head positioned above the roofline. The vehicle has chrome side mirrors and a silver sun shade visible in the windshield. The truck is pictured against a plain white background.
Front Snorkel Plastic Kit Trim Panel Assembly Suitable For Mazda BT50 2015-2024
Sale price$200.00 AUD Regular price$320.00 AUD
In stock, 5 units
Save $1,100.00
A product image featuring a matte black, heavy-duty steel rear bumper for an off-road vehicle, with all its mounting components, displayed beneath a logo for "ULTIMATE 4X4 ACCESSORIES Panel & Paint".

The main bumper features a central receiver hitch opening and includes integrated horizontal LED lights on both the left and right ends. Laid out in front of the bumper are various black metal mounting pieces: two large, angled brackets (possibly for D-rings or frame mounting), a central reinforcement plate, a
Rear Bumper Steel Bar With Mount Bracket Trim Panel Assembly Suitable For Toyota Hilux Revo N80
Sale price$400.00 AUD Regular price$1,500.00 AUD
Only 2 units left
Save $1,166.01
A front view of a red Nissan Navara or Frontier pickup truck (D40 generation) equipped with a black, angular aftermarket steel bull bar/bumper. The heavy-duty bumper features a single black hoop over the grille and houses an integrated horizontal LED light bar in the center section. The image is cropped tightly, showing the front end of the truck against a white background.A complete black, heavy-duty aftermarket front bumper kit for a vehicle, displayed against a white background. The main bumper features a large, integrated black tubular grille guard hoop and two horizontal LED light bars mounted on the left and right outer edges. It also includes an opening for a winch fairlead and multiple horizontal ventilation slots. Below the main bumper are various mounting brackets, bolts, hardware, and a separate black metal skid plate.
Single Loop Bull Bar & Skid Plate Set Suitable For Nissan Navara D40 2006-2011
Sale price$1,499.99 AUD Regular price$2,666.00 AUD
In stock, 4 units
Save $1,166.01
A complete, glossy black aftermarket steel front bumper kit for an off-road vehicle, laid out against a white background. The main bumper assembly is at the top, featuring a tubular top hoop, cutouts for two fog lights, and a central opening for a winch fairlead. Below it, the various separate components are arranged, including a large winch mounting plate, two side wings/fender extensions, smaller mounting brackets, hardware plates, and two large lower mounting arms, all finished in a matching black sheen.A white Ford Ranger pickup truck (likely 2015-2022 generation) is shown from a low front-quarter angle, heavily modified for off-roading. It is equipped with a black, heavy-duty steel bull bar/bumper that features a central tubular hoop, a horizontal LED light bar mounted below the hoop, and a winch installed in the center with a visible synthetic rope. The bumper also has integrated fog lights and two prominent red recovery shackles. A roof rack with an additional black LED light bar is visible on top.
Single Loop Bull Bar and Skid Plate Set Suitable For Ford Ranger PX2 T7 2015-2018
Sale price$1,499.99 AUD Regular price$2,666.00 AUD
Sold out
Front Coil Strut Shock Spacer Lift Kit 32mm With Set of Nuts Suitable For Mitsubishi Challenger 2005-2018Front Coil Strut Shock Spacer Lift Kit 32mm With Set of Nuts Suitable For Mitsubishi Challenger 2005-2018
Save $449.00
Mitsubishi Triton MQ 2015-2018 Ultimate Adventure Aluminium Flat Platform Roof RackMitsubishi Triton MQ 2015-2018 Ultimate Adventure Aluminium Flat Platform Roof Rack
Mitsubishi Triton MQ 2015-2018 Ultimate Adventure Aluminium Flat Platform Roof Rack
Sale price$650.00 AUD Regular price$1,099.00 AUD
Sold out
Save $1,166.01
Front 3 Loop Bull Bar & Skid Plate Set Assembly Suitable For Toyota Hilux N80 2015-2018Front 3 Loop Bull Bar & Skid Plate Set Assembly Suitable For Toyota Hilux N80 2015-2018
Front 3 Loop Bull Bar & Skid Plate Set Assembly Suitable For Toyota Hilux N80 2015-2018
Sale price$1,499.99 AUD Regular price$2,666.00 AUD
In stock, 9 units
Save $50.00
A close-up image of the front quarter panel of a dark gray/black pickup truck, likely a Ford Ranger, featuring a prominent ULTIMATE 4X4 ACCESSORIES logo overlay in the top section. The truck is fitted with wide, textured matte black bolt-on style fender flares over the wheel arch and front bumper section. The flares have visible silver rivets/bolts. The truck has a two-tone silver and dark gray factory wheel with Continental tires.A product image showing a complete set of matte black plastic bolt-on style fender flares for a vehicle, scattered and angled on a white background. The kit includes four main arch pieces (two large and two smaller, curved pieces) and several smaller pieces for bumper integration.
Front & Rear Ford Ranger Fender Flare Body Molding Trim Panel Assembly PX2 2015–2018
Sale price$350.00 AUD Regular price$400.00 AUD
Sold out
Save $55.00
A photo displaying black, molded plastic car accessories. In the center, there are eight pieces: four elongated, curved covers (likely for the door handles) and four smaller, rounded covers (likely for the door bowls/cups). The pieces are arranged in two rows. Above the accessories is the logo for "ULTIMATE 4X4 ACCESSORIES" featuring a distressed red star next to the text. In the bottom right corner, there is an oval inset showing the lower portion of a white pickup truck with some of the accessories.A top-down studio shot of eight matte black, molded plastic car accessories, likely door handle and door bowl covers. They are arranged in two rows on a white surface. The top row consists of four elongated, curved pieces (the door handle covers). The bottom row consists of four smaller, rounded pieces (the door bowl covers). The third piece from the left in the bottom row has a circular cutout, indicating a keyhole opening.
Front & Rear Door Handle Cover Trim Panel Assembly Suitable For Mazda BT50 2012-2024
Sale price$45.00 AUD Regular price$100.00 AUD
In stock, 18 units
Save $15.00

Black plastic window visors (also known as rain guards or window deflectors) for a vehicle, shown in a set of four pieces with varying lengths for the front and rear side windows.Black plastic window visors (rain guards or window deflectors) for a vehicle, displayed in a set of four pieces with two longer and two shorter parts, against a white background.
Front & Rear 4 Door Weather Shield Trim Panel Assembly Suitable For Toyota Fortuner 2015-2018
Sale price$85.00 AUD Regular price$100.00 AUD
In stock, 28 units
Save $50.00
Close-up of the front passenger side wheel arch of a white pickup truck, fitted with a textured black fender flare (also known as a fender arch or wheel arch extension). The fender flare is secured with exposed silver rivets or bolts. The image includes the 'ULTIMATE 4X4 ACCESSORIES' logo with a prominent red star graphic in the top left corner.Set of four black textured fender flares (wheel arch extensions) for a truck or SUV, displayed on a white background. The flares have pre-drilled holes for installation hardware and two of the arches are split into two sections. A circular close-up inset in the bottom right corner shows the heavy, basket-weave-like texture of the plastic material.
Front & Rear Fender Flare Body Molding Trim Panel Assembly Suitable For Toyota Hilux Revo N80 2015-2024
Sale price$350.00 AUD Regular price$400.00 AUD
In stock, 6 units
Pair of black automotive upper control arms (UCAs) for an off-road vehicle suspension lift, shown with installed bushings, ball joints, and accompanying installation hardware (washers and sleeves). The image has the 'ULTIMATE 4X4 ACCESSORIES' logo with a red star graphic at the top.Two black, high-performance aftermarket upper control arms (UCAs) for an off-road vehicle, arranged diagonally on a white surface. The control arms feature black bushings and yellow zinc-plated hardware on the ball joint. In the center, there is a pile of silver installation hardware, including four metal sleeves and four flat washers.
Top Left: A single, bright blue, anodized aluminum wheel spacer/adapter with four lug studs pressed in, against a white background. The spacer is round with four bolt holes.

Top Right: The logo for "ULTIMATE 4X4 ACCESSORIES Panel & Paint" which features a red star design.

Bottom Left: A pile of six silver, metallic lug nuts (likely locking nuts due to the visible blue/nylon insert) against a white background.

Bottom Right: Two of the same bright blue wheel spacers/adapters.A close-up image of a single, bright blue, anodized aluminum automotive lift/leveling spacer, likely for a strut or coil spring assembly. It has a circular shape with three outer bolt cutouts and three metal studs pressed into it. It is sitting on a white background.
Save $150.01
A straight-on, isolated view of a matte black vehicle grille featuring a large, diamond-pattern mesh insert. The outer frame of the grille is also black, with a small vertical support in the center of the top edge.
Front Upper Bumper Grille Panel Assembly Suitable Toyota Land Cruiser VDJ70 Series 2007-2024
Sale price$199.99 AUD Regular price$350.00 AUD
Only 2 units left
A long, narrow, dark, and glossy automotive bug deflector or bonnet protector, curved slightly upwards at the ends, isolated against a white background.
Front Hood Nissan Patrol Bonnet Protector 2004-2016
Sale price$100.00 AUD
In stock, 14 units
Car Neck Headrest and Lumbar Support SetCar Neck Headrest and Lumbar Support Set
Car Neck Headrest and Lumbar Support Set
+4
+3
+2
+1
Sale priceFrom $52.93 AUD
In stock, 8 units
Choose options
Universal Car Neck Support Leather CushionUniversal Car Neck Support Leather Cushion
Universal Car Neck Support Leather Cushion
+4
+3
+2
+1
Sale priceFrom $24.58 AUD
In stock, 40 units
Choose options
Car Headrest Memory Foam Neck PillowCar Headrest Memory Foam Neck Pillow
Car Headrest Memory Foam Neck Pillow
+2
+1
Sale priceFrom $27.87 AUD
In stock, 20 units
Choose options
Save $15.00

A studio product image showing a set of four dark-tinted plastic window visors (also known as rain guards or weather shields) against a white background. The visors are shown stacked and are designed to fit above the side windows of a vehicle. The top two pieces are curved for the front windows, and the bottom two pieces are longer and flatter for the rear windows.
Front & Rear 4 Door Weather Shield Trim Panel Assembly Suitable For Toyota Land Cruiser FJ80 1990-1998
Sale price$85.00 AUD Regular price$100.00 AUD
In stock, 20 units

Recently viewed