A flat, overhead view of a dark grey or black metallic car hood. The hood features two parallel raised lines running from front to back and a large, rectangular opening or scoop cutout near the center, designed for a hood scoop or vent grille. The cutout shows the unfinished metal structure beneath the opening. The hood surface has a semi-gloss finish and is isolated against a white background.
A high-contrast studio shot showing the underside, or inner structure, of a metallic dark grey car hood. The image reveals the complex stamped metal framework, including bracing, mounting points for hinges and latches, and several large circular and rectangular depressions for structural rigidity and insulation. The metal surface is reflective, highlighting the contours and internal supports.
A white or light cream-colored, elongated rectangular air scoop or vent trim, isolated on a white background. The piece has rounded corners and a slight, downward curve, with a narrow, recessed opening running nearly its entire length. The inner surface of the recess is dark grey or metallic, suggesting an open vent area. The image is taken at a slight angle.
A long, slender, light-colored (possibly white or beige) plastic or metal vent cover or air deflector. It has a slightly curved or tapered profile with rounded ends and appears to be designed to attach over a rectangular opening, such as a window air conditioner unit or a wall vent.
A top-down view of a long, rectangular object, likely a light-colored (white or cream) plastic vent or air grille. It has a smooth, curved outer casing and features a narrow, dark, recessed opening or slit running down the center, which contains an inner mechanism or slats.
A long, rectangular, light-colored (off-white or cream) plastic part, possibly a cover or trim piece, shown vertically. It has a smooth, curved front face and a flat edge on the right side, suggesting it clips or mounts flush against another surface.
A long, rectangular, beige or off-white plastic grille or vent insert, likely for an automobile dashboard, interior, or exterior body panel. It features a wide, recessed opening down the center, which is spanned by a thin horizontal bar supported by several small vertical struts. The part is sitting on a gray, wood-look plank floor.
A long, narrow, beige or off-white air vent cover or deflector, likely made of plastic, resting on a gray, wood-look plank floor. The part has a slightly curved profile with rounded ends and features a recessed central channel with several vertical supporting ribs visible underneath.
A close-up, angled view of a long, rectangular, beige or off-white plastic automotive or appliance vent cover or trim piece. The part has rounded corners and a deeply recessed central opening, and it is resting on a gray, wood-look plank floor.
A side view of a long, rectangular, beige or off-white plastic cover or trim piece, possibly for an appliance or vehicle interior. It has a smooth, curved front profile and is resting vertically on a gray, wood-look plank floor.
Roll over image to zoom in Click on image to zoom
A flat, overhead view of a dark grey or black metallic car hood. The hood features two parallel raised lines running from front to back and a large, rectangular opening or scoop cutout near the center, designed for a hood scoop or vent grille. The cutout shows the unfinished metal structure beneath the opening. The hood surface has a semi-gloss finish and is isolated against a white background.A high-contrast studio shot showing the underside, or inner structure, of a metallic dark grey car hood. The image reveals the complex stamped metal framework, including bracing, mounting points for hinges and latches, and several large circular and rectangular depressions for structural rigidity and insulation. The metal surface is reflective, highlighting the contours and internal supports.A white or light cream-colored, elongated rectangular air scoop or vent trim, isolated on a white background. The piece has rounded corners and a slight, downward curve, with a narrow, recessed opening running nearly its entire length. The inner surface of the recess is dark grey or metallic, suggesting an open vent area. The image is taken at a slight angle.A long, slender, light-colored (possibly white or beige) plastic or metal vent cover or air deflector. It has a slightly curved or tapered profile with rounded ends and appears to be designed to attach over a rectangular opening, such as a window air conditioner unit or a wall vent.A top-down view of a long, rectangular object, likely a light-colored (white or cream) plastic vent or air grille. It has a smooth, curved outer casing and features a narrow, dark, recessed opening or slit running down the center, which contains an inner mechanism or slats.A long, rectangular, light-colored (off-white or cream) plastic part, possibly a cover or trim piece, shown vertically. It has a smooth, curved front face and a flat edge on the right side, suggesting it clips or mounts flush against another surface.A long, rectangular, beige or off-white plastic grille or vent insert, likely for an automobile dashboard, interior, or exterior body panel. It features a wide, recessed opening down the center, which is spanned by a thin horizontal bar supported by several small vertical struts. The part is sitting on a gray, wood-look plank floor.A long, narrow, beige or off-white air vent cover or deflector, likely made of plastic, resting on a gray, wood-look plank floor. The part has a slightly curved profile with rounded ends and features a recessed central channel with several vertical supporting ribs visible underneath.A close-up, angled view of a long, rectangular, beige or off-white plastic automotive or appliance vent cover or trim piece. The part has rounded corners and a deeply recessed central opening, and it is resting on a gray, wood-look plank floor.A side view of a long, rectangular, beige or off-white plastic cover or trim piece, possibly for an appliance or vehicle interior. It has a smooth, curved front profile and is resting vertically on a gray, wood-look plank floor.

Front Hood Panel Bonnet With Scoop insert Trim — Toyota Land Cruiser VDJ70 Series 2016-2024

Save $100.00
Ultimate 4x4 Accesories Panel & PaintSKU: IF_1399B391
Price:
$799.00 AUD $899.00 AUD

Description

The 79 Series stance, your way. A bolt-on scoop insert that sharpens the front end without a full bonnet swap.

  • Direct-fit trim piece

Fits: Toyota Land Cruiser VDJ70 Series 2016-2024

Confirm fitment before you order — trial-fit before any paint or custom work, as altered or painted parts can't be returned. Professional installation recommended.

You may also like

Recently viewed